Solid Solutions Diamond Hard Coat 607 Kit 750ml

Solid Solutions Diamond Hard Coat is a premium glass finish epoxy resin that comes in two-parts. Formulated for use as a hard, clear laminating resin it's suitable for use on fiberglass, timber, concrete, canvas and other materials and can also be used as an adhesive. Providing a clear finish coat or decoupage and also suitable for filling shallow cavities. It has an enhanced resistance to UV light discoloration and once cured provides a wet liquid gloss look projecting the brightest and sharpest colours making it the perfect choice for professional artists. Follow the instructions for easy use, Solid Solutions Diamond Hard Coat has a very low viscosity, low odour and good working time with rapid bubble release. 

Directions for Use: 

• Work at temperatures in between 20°- 30°C.
• Set art piece a few centimeters above the work surface to allow for resin over run.
• Measure 2-part A resin to 1 part B hardener by volume.
• A 250ml mix, will remain fluid for around 30 minutes at 25°C. A 1 litre mix can be made, then poured out into smaller containers for individual tinting.
• Pour colour mixes onto a canvas until surplus resin falls over the edges, for extra bubble release lightly pass a propane torch flame over the surface to assist in bubble release.
• Let the art piece set for an hour then wipe or scrape off any drips from the edges of the canvas.

Storage

• Always keep caps on bottles when not in use. Store at room temperature (18°) away from direct sunlight.
  Do not store on concrete floors.
• Note resins and hardeners’ have a tendency to go thick and cloudy in cold weather. Check materials are clear and free flowing before using. Material can be reconstitution by standing the bottles with caps removed, in very hot water and stir the contents until the liquids are runny and non-cloudy. Allow to cool back to room temperature before proceeding with mixing. 

Safety Directions 

• Work in a well-ventilated area. Avoid contact with eyes and skin.
• Wear protective gloves and glasses when mixing and using.
• Over-exposure may cause sensitization.
• Uncured material can be removed with a solvent or methylated spirit followed by washing with warm soapy water. Always wear a mask when using any solvent cleaner.

Product Features 

• Brand: Solid Solutions
• 750ml
• Mixing Ratio 2:1 Volume
• Working time 30min @ 25° C
• Super Tough
• Super Low Viscosity
• Super Ultra Clear Finish
• Enhanced UV Resistance
• Pour Depth 1 mm – 2 mm
• Temperature Resistance – up to 80 degrees Celsius

Set Includes

• 1 x 500mL Part A Bottle
• 1 x 250mL Part B Bottle