Solid Solutions Solid Cast 606 Clear Wood Epoxy Kit 1kg

Solid Solutions Solid Cast 6060 Clear Wood Epoxy Kits are perfect for artists wanting to finish their wood based artworks with an ultra clear, glass like finish. It provides a tough surface that matches 50 coats of varnish in pour. The epoxy once mixed has a low viscosity and is self levelling which provides a beautiful finish. It can also be used to cast objects such as chess pieces or paperweights or for embedding objects such as coins, medals, shells and more. Defect in woodwork such as furniture, wood and floorboards can be filled with resin alone or mixed with sawdust or colorants. 

Mix Ratio: measure out 3 parts A to 1 part B by weight using a scale. DO NOT MIX BY VOLUME.

Product Features

• Brand: Solid Solutions 
• 1Kg 
• 3:1 Ratio
• Low Viscosity
• Ultra Clear Finish
• Matches 50 Coats of Varnish
• Curing Temp 20°C
• Cure Times 40mins at 25 Degrees
• Temperature Resistance Up to 80 degrees Celsius

Set Includes 

• Part A 1 x 750g of Part A in a 1 litre Bottle
• Part B 1 x 250g Part B in a 250ml Bottle

Directions 

• Mix Ratio: measure out 3 parts A to 1 part B by weight using a scale. DO NOT MIX BY VOLUME.
• Mix thoroughly in a straight sided, flat bottomed container. Using a flat ruler shaped mixing stick, mix well scraping around the sides and base of the container. Mix until the material is crystal clear, free of any streaks.
• A thin layer of resin will cure between 20°C and 30°C in 24 hours. Do not let the temperature drop below 20°C.
• Small castings and thin layers of room temperature cured resin can prove brittle in some applications. Maximum impact strength is gained after 5 days. A maximum block casting of around 250ml can be achieved in a silicone rubber mould.
• Clear coating on wood, bubbles can be removed by safely running a propane torch flame over the surface. Repeat after 15 minutes to remove further air bubbles that may rise from wood.
• Note resins and hardeners have a tendency to go thick and cloudy in cold weather. Check materials are clear and free flowing before using. Material can be reconstituted by standing the closed bottles in warm water until the liquids are clear and free-flowing. Dry the bottles before you open them and proceed with mixing.