Solid Solutions Polyurethane Casting Resin 2L 

Solid Solutions Polyurethane Casting Resin is a light amber coloured, low odour reactive polyurethane that is extremely fluid and pours like water into the mould. It reproduces the finest details and is suitable for casting models, small figures, jewellery parts and decorative pices when poured into a silicone rubber mould. Mixed easily in a 1:1 ratio it's naturally degased and has a pot life of 2 minutes, setting quickly into a firm, durable plastic able to be demoulded in around 15 minutes. 

The exclusive formulation of Solid Cast 660 allows the addition of all types of filler (mineral or metallic) to obtain different aspects, weights and volumes. For example, it is possible to create objects that imitate bronze, aluminium, etc. with the appropriate fillers.

Excellent for car restoration work, reproducing knobs, switches, trims and general plastic parts. Can be coloured using epoxy pigments, dyes and mica powders. Solid Cast 660 allows the addition of a high filler ratio (up to 200%)

Directions for Use 

Shake both part A and B containers before using. Pour out equal amounts of part A and part B by volume. Mix thoroughly in a straight sided, flat bottomed container with a flat ruler shaped mixing stick, scraping around the sides and base of the container. As the work time is short, mixing should be done in less than one minute. When the two parts are properly mixed the mixture should be streak free and uniformly light amber colour.

Once mixed, immediately pour in to a silicone rubber mould. Worktime: 2 - 2.5 minutes at 20°C. Demould: 15 – 30 minutes at 20°C. After use immediately replace the caps on the tins as Solid Cast 660 is moisture sensitive.

MIX RATIO: Mix 1 part A to 1 part B by volume, Example 100ml Part A + 100ml Part B

Product will cure amber / white when cured or cloudy white if any moisture absorption

Product Features 

• Brand: Solid Solutions 
• Polyurathane Casting Resin 
• 2L 
• 1 x 1L Part A Bottle
• 1 x 1L Part B Bottle
• Mixing Ratio 1:1 Volume
• Working time 2 – 2.5mins @ 20° C
• Extremely fluid
• Shore hardness 75D
• Demould: 15 – 40 minutes at 20°C